Tel +44(0)870 235 1314
Fax +44(0)870 235 1366

sales@equinox-communications.com

 

 Home Wireless Installation Hotspot Prices Wireless Routers Access Points Hot-Spots Indoor Aerials Outdoor Aerials Wireless @ Home Wi-Fi Boosters Splitters WiFi Earth Kit Installation Tips

 

Indoor 0.1W (20dB) Booster for 2.4GHz Wireless LAN

 

 

Indoor 0.1W (20dB) Booster for 2.4GHz Wireless LAN
Frequency: 2.4~2.5GHz
Operating Mode: Bi-directional, half-duplex Time Division Duplex SensesRF carrier from Transmitter and automatically switches Receive to transmit mode
Transmit Gain: 17dB Nominal
Frequency Response: +\-1dB over operating range
Output Power: 100mw(+20dBm) nominal
TX Input Power: 10dB Nominal
Receiver Gain: 10dB typical
Noise Figure: 3.5dB typical
Connectors: SMA female pin to radio, reverse-SMA male pin to antenna
Lightning Protection: Direct DC ground at antenna connector
DC Surge Protection: At 5 VDC input from transmission cable
Power Consumption: 650mA @ 5V/DC 105~240V AC from power supply
Dimensions: 78(L)mm x 55(W)mm x 29(H)mm
Operating Temperature: -20°C ~ +70°C
Humidity: Up to 100 Relative Humidity

 

Back