Wireless Wi-Fi Signal Booster
All products are now available in our
shop to purchase or
call us
Increase the coverage area and distance your wireless can be
used with a signal booster.
Indoor 0.1W (20dB) Booster for 2.4G Wireless LAN. With
a suitable pigtail this booster can be used for internal or external antenna.
Radio: SMA Socket (Female Pin) Antenna: Reverse SMA Socket (Male Pin)
Indoor
0.1W (20dB) Booster for 2.4GHz Wireless LAN
£ 55

| Indoor
0.1W (20dB) Booster for 2.4GHz Wireless LAN |
| Frequency: |
2.4~2.5GHz |
| Operating Mode: |
Bi-directional, half-duplex Time Division
Duplex SensesRF carrier from Transmitter and automatically switches
Receive to transmit mode |
| Transmit Gain: |
17dB Nominal |
| Frequency Response: |
+\-1dB over operating range |
| Output Power: |
100mw(+20dBm) nominal |
| TX Input Power: |
10dB Nominal |
| Receiver Gain: |
10dB typical |
| Noise Figure: |
3.5dB typical |
| Connectors: |
SMA female pin to radio, reverse-SMA male
pin to antenna |
| Lightning Protection: |
Direct DC ground at antenna connector |
| DC Surge Protection: |
At 5 VDC input from transmission cable |
| Power Consumption: |
650mA @ 5V/DC 105~240V AC from power supply |
| Dimensions: |
78(L)mm x 55(W)mm x 29(H)mm |
| Operating Temperature: |
-20°C
~ +70°C |
| Humidity: |
Up to 100 Relative Humidity |
|